Honda HR-V Owners & Service Manuals

Honda HR-V: Instrument Panel

READ NEXT:

 Indicators

*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch. *1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition

 Gauges and Displays

Gauges Gauges include the speedometer, tachometer and related indicators. They are displayed when the ignition switch is in ON (II)*1. ■Speedometer Displays your driving speed in mph and km/h. ■Ta

 Controls

SEE MORE:

 DTC B0028-11

Special Tools Required SRS Inflator Simulator 07SAZ-TB4011A SRS Simulator Lead L 070AZ-SNAA300 NOTE: Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components of the correct par

 Select Arm Clearance Inspection (M/T)

Inspection 1. Select Arm Clearance - Inspect Measure the clearance between the select arm (A) and the interlock (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 2. Standard: 0.01-0.21 mm (0.0004-0.0083 in) Service Limit: 0.21 mm (0.0083 in) Measure the wi

© 2019-2025 Copyright www.hohrv2.com