Honda HR-V Owners & Service Manuals

Honda HR-V: Controls

READ NEXT:

 Clock

Adjusting the Clock Models without navigation system You can adjust the time in the clock display with the ignition switch is in ON (II)*1. ■Adjusting the Time ■ Display audio system 1. Select th

 Locking and Unlocking the Doors

 Key Types and Functions

All the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft. The keys contain precision electronics. Adhere to the following advice to prevent damage to the

SEE MORE:

 Cylinder Head Assembly - Inspection & Adjustment

INSPECTION & ADJUSTMENT CYLINDER HEAD INSPECTION FOR WARPAGE Inspection 1. Cylinder Head - Remove 2. Cylinder Head Warpage - Inspect Check the cylinder head for warpage. Measure along the edges, and three ways across the center: If warpage is less than 0.08 mm (0.0031 in) cylinder head

 Input Shaft Thrust Clearance Adjustment (CVT)

Special Tools Required Mainshaft Holder 07GAJ-PG20110 Adjustment NOTE: If the transmission housing, the torque converter housing, the input shaft assembly, the stator shaft, or the thrust needle bearing were replaced, the input shaft thrust clearance must be adjusted. 1. Input Shaft Thrust Cleara

© 2019-2026 Copyright www.hohrv2.com