Honda HR-V: Testing
READ NEXT:
Back-Up Light Switch Test (M/T)
Test
Back-Up Light Side
1. Air Cleaner - Remove
2. Back-Up Light Switch - Test
Disconnect the connector (A).
Check for continuity between back-up light switch 4P connector terminals
No. 2
an
Clutch Pedal Position Switch A Test (M/T)
Test
1. Connector (Clutch Pedal Position Switch A) - Disconnect
Disconnect the connector (A).
2. Clutch Pedal Position Switch A - Test
Check for continuity between the terminals according to th
Symptom Troubleshooting
MANUAL TRANSMISSION SYMPTOM TROUBLESHOOTING INDEX (M/T)
REVERSE LOCKOUT SYSTEM SYMPTOM TROUBLESHOOTING - DRIVER CAN SELECT REVERSE
GEAR WHEN VEHICLE SPEED IS 20 KM/H (12 MPH) OR MORE (M/T)
NOTE: Re
SEE MORE:
DTC Troubleshooting 11-11, 13-11, 15-11, 17-11: Wheel Speed Sensor Circuit
Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting
information.
1. Problem verification:
Turn the vehicle to the ON mode.
Clear the DTC with the HDS.
Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.
Check for DTCs with the HDS.
Is DTC 11-11, 13-11, 15-11, or 17-1
Final Drive Shaft Disassembly and Reassembly (CVT)
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Attachment, 45 mm 07947-6890300
Bearing Separator 07KAF-PS30200
Exploded View
1. Final Drive Shaft - Exploded View
Disassembly
NOTE: The tapered roller bearing and the tapered roller bearing outer race
should be replaced as a set.
1.
© 2019-2025 Copyright www.hohrv2.com
