Honda HR-V: Symptom Troubleshooting
Honda HR-V (2015-2021) Service Manual / Accessories & Equipment / Driving Assistance Warning - Testing & Troubleshooting / Symptom Troubleshooting
- Both FCW And LDW Indicators (Amber) Come ON At The Same Time (Temperature Too Hot) (Forward Collision Warning (FCW)
- Forward Collision Warning (FCW) Symptom Troubleshooting - Both FCW And LDW Indicator (Amber) Do Not Go OFF
- Forward Collision Warning (FCW) Symptom Troubleshooting - FCW Indicator (Amber) Does Not Blink When The System Warns, FCW Warning Buzzer Does Not Sound When The System Warns
- HDS Does Not Communicate With The Multi Purpose Camera Unit (Forward Collision Warning (FCW)
- Lane Departure Warning (LDW) Symptom Troubleshooting - LDW OFF Switch Does Not Work Or OFF Indicator Does Not Come ON
- Lane Departure Warning (LDW) Symptom Troubleshooting - LDW Indicator (Amber) Does Not Blink When The System Warns, LDW Warning Buzzer Does Not Sound When The System Warns
READ NEXT:
Both FCW And LDW Indicators (Amber) Come ON At The Same Time
(Temperature Too Hot) (Forward Collision Warning (FCW)
Refer to: How to Troubleshoot the Forward Collision Warning (FCW) or How to
Troubleshoot the Lane
Departure Warning (LDW)
BOTH FCW AND LDW INDICATORS (AMBER) DOES NOT GO OFF (FORWARD COLLISION
WARNIN
Forward Collision Warning (FCW) Symptom Troubleshooting - Both FCW
And LDW Indicator (Amber) Do Not Go OFF
1. Problem verification:
Turn the vehicle to the ON mode.
Wait for about 6 seconds.
Do both FCW and LDW indicator go off?
YES
Intermittent failure, the system is OK.
NO
Go to step 2.
2. Fuse check
Forward Collision Warning (FCW) Symptom Troubleshooting - FCW
Indicator (Amber) Does Not Blink When The System Warns, FCW Warning Buzzer Does
Not Sound When The System Warns
1. FCW indicator and warning buzzer check:
Select FCW/LDW/High Beam Support/Traffic Sign Recognition System from
the DRIVING SUPPORT
menu with the HDS, and enter the FUNCTION TEST.
Select FCW dr
SEE MORE:
DTC B0021-11
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If so, verify
that all the required components were replaced with new components of the
correct part number,
and that they were properly installed.
Before doing this troubleshooting procedure, rev
Auxiliary Under-Dash Fuse Box Removal and Installation
Removal & Installation
1. 12 Volt Battery Terminal - Disconnect
2. Auxiliary Under-Dash Fuse Box A - Remove
Remove the cover (B) from the auxiliary under-dash fuse
box A (A)
Remove the cable terminal (C)
Remove the connectors (D)
Remove the auxiliary under-dash fuse box A.
3. Bracket - R
© 2019-2025 Copyright www.hohrv2.com
