Honda HR-V: Engine Cooling System - Testing & Troubleshooting
READ NEXT:
WATER PUMP INSPECTION
Inspection
1. Water Pump Pulley Mounting Bolt - Loosen
Loosen the bolts (A).
2. Drive Belt - Remove
3. Water Pump Pulley - Remove
4. Water Pump - Inspect
Turn the water p
COOLING FAN CONTROL SYSTEM DESCRIPTION - OVERVIEW
Overview
Receiving various signals, such as coolant temperature signals and
refrigerant compression signals, from
sensors, the PCM performs the fan c
POWER RELAY TEST
Special Tools Required
Relay Puller
07AAC-
000A2A1 or
07AAC-
000A1A0
Relay Socket
Extension (5 Pin)
07AGK-
000A2A0
Relay Socket
Extension (4 Pin)
07AGK-
000A1A0
Test
1. Power Relay
SEE MORE:
NOTE: Before you troubleshoot, review the general troubleshooting
information.
1. Problem verification:
Turn the vehicle to the ON mode.
Clear the DTC with the HDS.
Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.
Check for DTCs with the HDS.
Is DTC 54-11 or 54-12 indicated?
YE
NOTE:
Before doing this troubleshooting procedure, find out if the vehicle was
in a collision. If so, verify
that all the required components were replaced with new components of the
correct part number,
and that they were properly installed.
Before doing this troubleshooting procedure, rev