Honda HR-V: Audio/Information Screen
Displays the audio status and wallpaper. From this screen, you can go to
various
setup options.
- Use simple gestures - including touching,
swiping, and scrolling - to operate certain audio
functions.
- Wearing gloves may limit or prevent touchscreen
response.
- You can use the microfiber soft cleaning cloth to
remove dust or fingerprints from the touchscreen.
■Switching the Display
Using the button
Press the (display) button on
the steering wheel to change the display.
Using the HOME screen
Select HOME to go to the HOME screen.
Select Phone, Info, Audio, Settings, or HondaLink.
■ Phone
Shows the HFL information.
■ Info
Shows the Trip Computer, Clock/Wallpaper, Voice Info, or System/Device
Information.
■ Audio
Shows the current audio information.
■ Settings
Enters the customizing menu screen.
■ HondaLink Apps
Connects with your smartphone*1 to play personalized music, information, and
social media streams.
■Wallpaper Setup
You can change, store, and delete the wallpaper on the audio/information
screen.
- When importing wallpaper files, the image must be
in the USB flash drive's root directory. Images in a
folder cannot be imported.
- The file name must be fewer than 256 characters.
- The file format of the image that can be imported
is BMP (bmp) or JPEG (jpg).
- The individual file size limit is 5 MB.
- The maximum image size is 4,096 x 4,096 pixels. If
the image size is less than 800 × 480 pixels, the
image is displayed in the middle of the screen with
the extra area appearing in black.
- Up to 5 files can be selected.
- If the USB flash drive does not have any pictures,
the No files detected message appears.
1. Connect the USB flash drive to the USB
port.
2. Select Settings to go to the Settings
screen.
3. Select Info.
4. Select Clock/Wallpaper Type, then the
Wallpaper tab.
5. Select Add New.
- The picture name is displayed on the list.
6. Select a desired picture.
- The preview is displayed on the left side
on the screen.
7. Select Start Import to save the data.
- Then the display will return to the
wallpaper list.
■ Select wallpaper
1. Select Settings to go to the Settings screen.
2. Select Info.
3. Select Clock/Wallpaper Type, then the Wallpaper tab.
- The screen changes to the wallpaper list.
4. Select a desired wallpaper.
- The preview is displayed on the left side on the screen.
- The pop-up menu appears on the screen.
5. Select Set.
- The display will return to the wallpaper list.
■ Delete wallpaper
1. Select Settings to go to the Settings screen.
2. Select Info.
3. Select Clock/Wallpaper Type, then the Wallpaper tab.
- The screen changes to the wallpaper list.
4. Select a wallpaper that you want to delete.
- The preview is displayed on the left side on the screen.
- The pop-up menu appears on the screen.
5. Select Delete.
- The confirmation message will appear.
6. Select Yes to delete completely.
- The display will return to the wallpaper list.
From the pop-up menu, select Preview to see a
preview at full-size screen.
To go back to the previous screen, select OK, or
BACK.
When the file size is large, it takes a while to be
previewed.
To delete all wallpapers you add, select Delete All,
then Yes.
READ NEXT:
1. Select HOME.
2. Select Settings.
3. Select Audio.
4. Select Sound.
Select the tabs to adjust the following choices:
BASS, TREBLE, FADER, BALANCE, SVC
(Speed-sensitive Volume Compensation)
The
*1:Some or all of the lists may not be displayed.
The ST indicator appears on the display indicating
stereo FM broadcasts.
Stereo reproduction in AM is not available.
Switching the Audio Mode
Press
Your audio system supports audio CDs, CD-Rs, and CD-RWs in either MP3 or WMA,
or AAC*1 format. With the CD loaded, select the CD mode.
*1: Only AAC format files recorded with iTunes are playable on t
SEE MORE:
NOTE: Examples used in this article are general in nature and do not
necessarily relate
to a specific engine or system. Illustrations and procedures have been chosen
to guide mechanic through engine overhaul process. Descriptions of processes
of cleaning, inspection, assembly and machine shop pract
When replacing, use the following bulbs.
Rear Turn Signal Light: 21 W (Amber)
1. Use a Phillips-head screwdriver to remove
the bolts.
2. Pull the light assembly out of the rear pillar.
3. Turn the socket to the left and remove it.
4. Remove the old bulb.
5. Insert a new bulb.
6. Slide the light