Honda HR-V Owners & Service Manuals

Honda HR-V: Tire Pressure Monitoring System (TPMS) - Required Federal Explanation

Honda HR-V (2015-2021) Owner's Manual / Driving / When Driving / Tire Pressure Monitoring System (TPMS) - Required Federal Explanation

U.S. models

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.

(If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale


when one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.

Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.

The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.

When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.

TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.

Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.

    READ NEXT:

     Braking

     Brake System

    ■Parking Brake Use the parking brake to keep the vehicle stationary when parked. You can manually apply and release, or automatically release it. You may hear the electric parking brake system opera

     Automatic Brake Hold

    Continuously variable transmission models Keeps the brake applied after releasing the brake pedal until the accelerator pedal is pressed. You can use this system while the vehicle is temporarily stop

    SEE MORE:

     Torque Converter Housing Bearing Replacement (CVT)

    Special Tools Required Snap Ring Pliers 07LGC- 0010100 Replacement NOTE: Apply a light coat of clean transmission fluid on all parts before installation. 1. Torque Converter Housing Bearing - Remove While expanding the snap ring (A) using the snap ring pliers, remove the torque converter housi

     DTC 1101 Media Bus Send Error

    NOTE: Check the vehicle 12 volt battery condition first. This audio DTC sets when there is an internal error in BUS sending. Before you troubleshoot, make sure to follow the General Troubleshooting Information. 1. Problem verification: Clear the hard error codes. Turn the vehicle to the OF

    © 2019-2025 Copyright www.hohrv2.com