Honda HR-V: DTC U0051-96 Steering Angle Sensor Malfunction
NOTE : Before you troubleshoot, review the how to troubleshoot information -
Refer to: How to Troubleshoot
the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure
Warning (LDW).
DTCs (FCW/LDW)
1. Problem verification.
- Turn the vehicle to the ON mode.
- Clear the DTC with the HDS.
Clear DTCs
- Turn the vehicle to the OFF (LOCK) mode.
- Wait for 10 seconds.
- Turn the vehicle to the ON mode.
- Check for DTCs with the HDS.
Is DTC U0051-96 indicated?
YES
Go to VSA system troubleshooting.
NO
Intermittent failure, the system is OK at this time.
DTC U0101-00 LOST COMMUNICATION WITH TCM(MULTIPURPOSE CAMERA UNIT)
NOTE :
- Before you troubleshoot, review the how to troubleshooting information -
Refer to: How to Troubleshoot
the Forward Collision Warning (FCW), or How to Troubleshoot the Lane
Departure Warning
(LDW).
- If incorrect the multi purpose camera unit part number, indicated DTC
U0101-00.
DTCs (FCW/LDW)
1. Problem verification.
- Turn the vehicle to the ON mode.
- Clear the DTC with the HDS.
Clear DTCs
- Check for poor connections or loose terminals at the PCM.
- Turn the vehicle to the OFF (LOCK) mode.
- Wait for 10 seconds.
- Turn the vehicle to the ON mode.
- Check for DTCs with the HDS.
Is DTC U0101-00 indicated?
YES
Go to PGM-FI system troubleshooting - Refer to: How to Troubleshoot the Fuel
and Emissions
Systems, or How to Troubleshoot the CVT System (CVT).
NO
Intermittent failure, the system is OK at this time.
READ NEXT:
NOTE : Before you troubleshoot, review the how to troubleshooting information
- Refer to: How to
Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the
Lane Departure
Warning (
NOTE : Before you troubleshoot, review the how to troubleshooting information
- Refer to: How to
Troubleshoot the Forward Collision Warning (FCW), or How to Troubleshoot the
Lane Departure
Warning (
NOTE : Before you troubleshoot, review the how to troubleshoot information -
Refer to: How to Troubleshoot
the Forward Collision Warning (FCW), or How to Troubleshoot the Lane Departure
Warning (LDW
SEE MORE:
Removal & Installation
1. Intake Manifold - Remove
2. Knock Sensor - Remove
Fig. 28: Knock Sensor Location With Torque Specifications
Disconnect the connector (A)
Remove the knock sensor (B).
3. All Removed Parts - Install
Install the parts in the reverse order of removal.
NOTE: When ins
Removal
Do not spill brake fluid on the vehicle; it may damage the paint. If brake
fluid gets on the paint, wash it off
immediately with water.
NOTE: After removal, plug the ends of the hoses and the joints to prevent
spilling brake fluid.
Front
1. Vehicle - Lift
2. Front Wheels - Remove
3. Brake